Seeking Metal Foils

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
fatcatglass

Seeking Metal Foils

Post by fatcatglass »

I would like to find foil for inclusions (copper,silver,???)that is thicker than leaf but still thin enough to fuse.This is my first post and would appreciate any and all imput re:foil inclusions.....
Thanks,
Scott
Judy Schnabel
Posts: 195
Joined: Mon Mar 10, 2003 9:45 pm
Location: SW FL
Contact:

Post by Judy Schnabel »

Scott,

I hope this works
http://www.warmglass.com/cgi-bin/wgarchive3.pl?index
This is a link to a discussion in the archives regarding copper inclusions.

If this doesn't work, go to the archives and type in copper inclusions. There have been lots of discussions on different types of inclusions.

Judy
Judy Schnabel
Posts: 195
Joined: Mon Mar 10, 2003 9:45 pm
Location: SW FL
Contact:

Post by Judy Schnabel »

Scott,

Go to the top of the page on the left "Old Archive" under "Warm Glass." Click onto that.

Then type in copper inclusions. I found lots of information.

I tried copying the link but I'm guessing since it's the old archives it didn't work.

Judy
Tony Smith
Posts: 1037
Joined: Sun Mar 09, 2003 5:59 pm
Location: Massachusetts, USA
Contact:

Post by Tony Smith »

Olympic color rods sells all of the foils you mentioned http://www.glasscolor.com/catalog/metalLeaf/index.asp.

The Bullseye connection http://www.bullseyeconnection.com also sells foil.

For copper screen, go to Michael's and buy the mesh used for moldmaking.


Tony
The tightrope between being strange and being creative is too narrow to walk without occasionally landing on both sides..." Scott Berkun
Cynthia

Post by Cynthia »

you can also try:

http://www.thompsonenamel.com
http://www.dickblick.com
Sepp Leaf products...1 800 971-7377
Lisa Rivera Skubal
Posts: 2
Joined: Wed Mar 12, 2003 5:33 pm
Location: Washburn, Iowa

Post by Lisa Rivera Skubal »

Tess Farley

Post by Tess Farley »

Give a call to Jim Apistolas at Nimrod Hall Copper Company. They carry copper sheeting in varying thickensses of 1 mil, 2 mil, 5 mil and 8 mil. Widths are 6", 12" and 18". Their number is 703-978-9192 or 703-447-6509. Their email address is sales@nimrodhall.com. They will send you some samples.
Walt

Post by Walt »

meny of the hobby shops carry copper and brass
i get mine at a ACE hardware store
Zenovia
Posts: 2
Joined: Wed May 21, 2003 6:18 pm
Location: Austin, TX

Post by Zenovia »

Try ss & copper sheet - 30 guage
sadiesjewels
Posts: 48
Joined: Mon Mar 10, 2003 2:02 pm
Location: N. CA
Contact:

Post by sadiesjewels »

Metalliferous sell all kinds of copper and other metals in foil, sheet, mesh etc .... interesting catalog too! (Not the on line version - I hate pdf files!)

Sadie
Post Reply